| Filter
Pack |
Membrane
Area:
L Mode: 0.48
square feet (0.16 square meters)
P Mode: 16.44 square feet (1.58 square meters) |
| Hold-Up Volume: P
Mode: 0.8 Gallons (3 Liters) |
| Filtrate
Removal Capacity: 2.25
GPM (8500 ml/min) |
| Maximum Operating
Pressure: 600
psi (41 bar) |
| Wetted
Materials: 316
Stainless Steel, Polypropylene, EPDM (Others
Available) |
| Vibration
Drive System |
| Motor: Baldor,
2HP, 1725 RPM |
| Speed Controller: ABB
ACS401600422 |
| Drive
Bearings: Morse
Sealmaster RFB2102 |
| Electrical
Specifications |
| Power
Supply Voltage : 208-24-
VAC 3 Phase |
| Normal Full
Load Operating Current: 9-12
Amps |
| Power
Cord: 8
Feet (2.4 Meters) with NEMA L15-30 Plug |
| Required Receptacle: NEMA
L15-30, 30 Apm Circuit |
| Feed
System |
| Pump: Hydra-Cell |
| Motor: Baldor,
2HP |
| Pump
Bypass Valve: Wanner |
| Pump Motor
Controller: ABB
ACS401600522 |
| Voltage: Wanner |
| Control Valve
at Process Outlet: Parker |
| Actuator: Parker
Model 71 |
| Instrumentation |
| Pressure
Gauges: Ashcroft
Model 1009 (0-600 psi [0-41 bar]) |
| Temperature
Probe: Ashcroft
Type 2410E Digital |
| Conductivity
Monitor/Controller : Myron
Model 758 Series II |
| Conductivity
Sensor: Myron
Model CS51 |
| pH/ORP
Controller: Oakton
Model WD-35100-10 |
| pH/ORP Electrode: Cole-Parmer
Model EW-27011-11 |
| Flow
Meter: King
Instruments Model 7511 |
| Operating
Site Conditions |
| Equipment
Rating: NEMA
4, Indoor-Outdoor (Protect from Sun and
Rain) |
| Ambient Temperature: 0-104°F
(0-40°C) |
| Storage
Temperature: -68-140°F
(0-40°C) |
| Relative Humidity: 90%
or Less (Non-Condensing) |
| Elevation: 3300
Feet (1006 Meters) Without Derating |
